OOO "ФилФар Технолоджи"

AS-Interface sensor/actuator module VBA-4E2A-G2-XE/E2

  AS-Interface sensor/actuator module VBA-4E2A-G2-XE/E2
Под заказТолько оптом

Цену уточняйте

  • +375 показать номер +375(44)765-55-50
  • +375(29)690-11-55

Заказ только по телефону

  • Контакты
    • Телефон:
      +375(44)765-55-50
      +375(29)690-11-55
    • Контактное лицо:
      Сергей, Владимир
    • Адрес:
      ул. Западная, д.13, каб.519, Минск, Беларусь
    • Email:
      zapros@filfar.by

Техническая спецификация в PDF  

Описание оборудования

G2 flat module
4 inputs and 2electronic outputs

General specifications

Slave typeA/B slave
AS-Interface specificationV2.1
Required master specification? V2.1
UL File NumberE223772

Indicators/operating means

LED FAULTerror display; LED red
red: communication error or address is 0
red flashing: overload of outputs
LED PWRAS-Interface voltage; LED green
LED AUXext. auxiliary voltage UAUX ; LED green
LED INswitching state (input); 4 LED yellow
LED OUTSwitching state (output); 2 LED yellow

Electrical specifications

Auxiliary voltage (output)20 ... 30 V DC PELV
Rated operating voltage26.5 ... 31.6 V from AS-Interface
Rated operating current? 30 mA
Protection classIII
Current loading capacity2 A (IAUX)
Surge protectionUAUX, Uin: Over voltage category III, safe isolated power supplies (PELV)

Input

Number/Type4 inputs for mechanical contacts or 3-wire sensors (PNP), DC
Supplyfrom external auxiliary voltage UAUX
Input current3 mA (typically)
Switching pointaccording to DIN EN 61131-2 (type 1)
Signal delay< 2 ms (input/AS-Interface)
Signal frequency? 250 Hz

Output

Number/Type2 electronic outputs, PNP, overload and short-circuit proof
Supplyfrom external auxiliary voltage UAUX
Current1 A per output , 2 A per module
Voltage? (UAUX - 0.5 V)
Usage categoryDC-13

Galvanic isolation

Input/Outputnone
Input/AS-InterfaceBasic insulation, rated insulation voltage120VDC
Output/AS-InterfaceBasic insulation, rated insulation voltage120VDC

Directive conformity

Electromagnetic compatibilityobserve notices on the certificate of conformity.

Standard conformity

Galvanic isolationEN 60947-1:2007
Degree of protectionEN60529:2000
Mech. capacityEN60068-2-6:2008, EN60068-2-27:1995
InputEN 61131-2:2007
Usage categoryEN60947-5-1:2005
Emitted interferenceEN61000-6-4:2001
AS-InterfaceEN62026-2:2013
Noise immunityEN 61326-1:2006

Programming instructions

ProfileS-7.A.E
IO code7
ID codeA
ID1 code7
ID2 codeE
Data bits (function via AS-Interface) input output
Parameter bits (programmable via AS-i)function

Ambient conditions

Ambient temperature-25 ... 60 °C (-13 ... 140 °F)
Storage temperature-25 ... 85 °C (-13 ... 185 °F)
Relative humidity85 % , noncondensing
Climatic conditionsFor indoor use only
Altitude? 2000 m above MSL
Pollution degree3

Mechanical specifications

Degree of protectionIP67
ConnectionCable piercing method
flat cable yellow/flat cable black
inputs/outputs: M12 round connector
Material
Massapprox. 100 g
Tightening torque, cable gland0.4 Nm
MountingMounting plate

 

По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:

  

8 (029) 555-8-000

  

8 (044) 555-8-000

 

8 (017) 255-8-000

Или отправьте нам запрос на e-mail:  zapros@filfar.by

 

Информация для заказа
  • Цена: Цену уточняйте
Контакты
  • Телефон:
    +375(44)765-55-50
    +375(29)690-11-55
  • Контактное лицо:
    Сергей, Владимир
  • Адрес:
    ул. Западная, д.13, каб.519, Минск, Беларусь
  • Email:
    zapros@filfar.by
Карта