11075858 | FOG 9 + GT 7
Описание
Информация для заказа
|
electrical ratings (encoder) |
|
|---|---|
| Voltage supply | 9...30 VDC; 5 VDC ±5 % |
| Consumption w/o load | ≤100 mA |
| Pulses per revolution | 100 … 5000 |
| Phase shift | 90 ° ±20° |
| Duty cycle | 40…60 % |
| Reference signal | Zero pulse, width 90° |
| Output frequency | Zero pulse, width 90°≤120 kHz ≤300 kHz (on request) |
| Output signals | Zero pulse, width 90°≤120 kHz ≤300 kHz (on request)K1, K2, K0 + inverted Error output (option EMS) |
| Output stages | HTL; TTL/RS422 |
|
electrical ratings (tachogenerator) |
|
| Reversal tolerance | ≤0,1 % |
| Linearity tolerance | ≤0,15 % |
| Temperature coefficient | ± 0,05 %/K (open-circuit) |
| Isolation class | B |
| Calibration tolerance | ±5 % |
| Climatic test | Humid heat, constant (IEC 60068-2-3, Ca) |
| Performance | Humid heat, constant (IEC 60068-2-3, Ca)GT 7.08: 0.3 W (speed ≥5000 rpm) GT 7.16: 0.6 W (speed ≥5000 rpm) |
| Armature-circuit time-constant | <4 µs |
| Open-circuit voltage | 10...60 mV per rpm |
|
mechanical design |
|
| Size (flange) | ø115 mm |
| Shaft type | ø11 mm solid shaft |
| Admitted shaft load | ø11 mm solid shaft≤200 N axial ≤300 N radial |
| Flange | EURO flange B10 |
| Protection DIN EN 60529 | IP 55 |
| Operating speed | ≤10000 rpm |
| Operating torque typ. | 6 Ncm |
| Rotor moment of inertia | 160 gcm² |
| Material | 160 gcm²Housing: aluminium die-cast Shaft: stainless steel |
| Operating temperature | 160 gcm²Housing: aluminium die-cast Shaft: stainless steel-30...+100 °C -25...+100 °C (>3072 pulses per revolution) |
| Resistance | 160 gcm²Housing: aluminium die-cast Shaft: stainless steel-30...+100 °C -25...+100 °C (>3072 pulses per revolution)IEC 60068-2-6 Vibration 10 g, 10-2000 Hz IEC 60068-2-27 Shock 100 g, 6 ms |
| Corrosion protection | 160 gcm²Housing: aluminium die-cast Shaft: stainless steel-30...+100 °C -25...+100 °C (>3072 pulses per revolution)IEC 60068-2-6 Vibration 10 g, 10-2000 Hz IEC 60068-2-27 Shock 100 g, 6 msIEC 60068-2-52 Salt mist for ambient conditions C4 according to ISO 12944-2 |
| Connection | 160 gcm²Housing: aluminium die-cast Shaft: stainless steel-30...+100 °C -25...+100 °C (>3072 pulses per revolution)IEC 60068-2-6 Vibration 10 g, 10-2000 Hz IEC 60068-2-27 Shock 100 g, 6 msIEC 60068-2-52 Salt mist for ambient conditions C4 according to ISO 12944-2Flange connector M23, 12-pin Screw terminal connector Connecting cable (option) |
| Weight approx. | 160 gcm²Housing: aluminium die-cast Shaft: stainless steel-30...+100 °C -25...+100 °C (>3072 pulses per revolution)IEC 60068-2-6 Vibration 10 g, 10-2000 Hz IEC 60068-2-27 Shock 100 g, 6 msIEC 60068-2-52 Salt mist for ambient conditions C4 according to ISO 12944-2Flange connector M23, 12-pin Screw terminal connector Connecting cable (option)1,3 kg (GT 7.08) 1,6 kg (GT 7.16) |
| Interference immunity | EN 61000-6-2 |
| Emitted interference | EN 61000-6-3 |
| Approval | CE |
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
|
|
8 (029) 555-8-000 |
|
|
8 (044) 555-8-000 |
|
|
8 (017) 255-8-000 |
- Цена: 1 руб.
Информация для покупателя
ООО «ФилФар Технолоджи»
220036, г. Минск, ул. Западная, д.13, к.519
Дата регистрации в Торговом реестре/Реестре бытовых услуг: 18.03.2015
Номер в Торговом реестре/Реестре бытовых услуг: 220993, Республика Беларусь
УНП: 192123248
Регистрационный орган: Минский горисполком
Дата регистрации компании: 18.09.2013
Ссылка на свидетельство/лицензию
Режим работы:
| День | Время работы |
|---|---|
| Понедельник | 09:00-17:00 |
| Вторник | 09:00-17:00 |
| Среда | 09:00-17:00 |
| Четверг | 09:00-17:00 |
| Пятница | 09:00-17:00 |
| Суббота | Выходной |
| Воскресенье | Выходной |