Switching cam encoder NOCN/S3 SIL2/PLd
This involves a play-free electronic switching cam encoder (abbreviated to: NOCN) with two (At version 79 four) galvanically separated switching outputs (cams), which can be set by the customer and which are activated or deactivated depending on the relevant position of the drive shaft. An absolute mulitturn encoder with CANopen interface, adjustable parameters and an electroИли отправьте нам запрос на realized in the compact housing. A separate controller unit monitors the function of the cams. The encoder's CANopen position signal and the switching outputs can be parameterised separately. The parameterisation (cam limits, resolution, measuring range a.s.o.) has to be verified to the NOCN via a checksum. This checksum can be calculated by a TWK program or the standard algorithm recommended by the CiA. After verification the device can be set operational. Preset and resolution of the position signal also influence the cams which refer to the position signal. Parameterisation is carried out via the relevant CANopen objects in accordance with the encoder profile according to CiA, DS 406, revision 4.01.
Product category: | Switching cam encoders |
Interface: | CANopen Safety, Relais |
Single- or Multiturn: | Multiturn |
Design: | 58mm, 64mm, 65mm, 66mm, 79mm |
Special feature: | SIL2/PLd |
Flange and shaft: | Clamped flange, shaft 10mm with feather key, Clamped flange, shaft 10mm with flattened area, Clamped flange, shaft 12mm for measurement gear ZRS, Clamped flange, shaft 12mm with feather key, Clamped flange, shaft 12mm with flattened area, Synchroniser flange, shaft 12mm with feather key |
Number of switching outputs: | 2 switching outputs SIL2. With NOCN79: Up to 4 switching outputs SIL2 |
Housing material: | Aluminium, Stainless steel 1.4305, Stainless steel 1.4404 |
Resolution: | 4096 = 12-bit. 8192 also possible. With NOCN79: 16.384 (14-bit) and 32.768 (15-bit) |
Code type: | Binary, Slewing ring functionality (only with NOCN without switching contacts) |
Measuring range: | 16 revolutions, 256 revolutions, 4096 revolutions |
Profile: | CANopen safety profile and SIL2 switching outputs, if available, CANopen standard profile and SIL2 switching outputs |
Electrical connection: | 1 connection, 2 connections, 3 connections, Cable, 1m, radial (other lengths on request) , Device connector M12, radial , Via cable 1m, axial (with NOCN79 onlyИли отправьте нам запрос наnnector M12, axial (with NOCN79 only on request) |
Galvanic seperation: | -UB = CAN_GND = screen/housing, -UB = CAN_GND ǂ screen/housing, -UB ǂ CAN_GND ǂ screen/housing (recommended) |
Electrial and/or mechanical variant: | Like standard but with shaft sealing ring, Standard |
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-mail: zapros@filfar.by
- Цена: Цену уточняйте
ООО «ФилФар Технолоджи»
220036, г. Минск, ул. Западная, д.13, к.519
Номер в Торговом реестре/Реестре бытовых услуг: 220993, Республика Беларусь
УНП: 192123248
Регистрационный орган: Минский горисполком
Дата регистрации компании: 18.09.2013
Ссылка на свидетельство/лицензию
Режим работы:
День | Время работы |
---|---|
Понедельник | 09:00-17:00 |
Вторник | 09:00-17:00 |
Среда | 09:00-17:00 |
Четверг | 09:00-17:00 |
Пятница | 09:00-17:00 |
Суббота | Выходной |
Воскресенье | Выходной |