Продавец OOO "ФилФар Технолоджи" развивает свой бизнес на Deal.by 7 лет.
Знак PRO означает, что продавец пользуется одним из платных пакетов услуг Deal.by с расширенными функциональными возможностями.
Сравнить возможности действующих пакетов

OOO "ФилФар Технолоджи"

WI-010

Под заказТолько оптом

Цену уточняйте

  • +375 показать номер +375(44)765-55-50
  • +375(29)690-11-55

Заказ только по телефону

ModelWI-010*1*2*3
Reference distance18 mm 0.71"
Measurement rangeZ1.4 mm 0.06" (Standard Mode), 0.7 mm 0.03" (High Speed Mode)
XY10 × 10 mm 0.39" × 0.39"
Minimum detection area40 × 40 µm 0.001575" × 0.001575"
Repeatability (height difference)0.1 µm 0.000004"*4
Linearity (height difference)±2.8 µm 0.000110"(±0.2% of F.S., F.S. = 1.4 mm 0.06", +20 to +30°C +68 to +86°F)*5
Light source for measurementTypeInfrared SLD
Center wavelength830 nm
Laser class (IEC60825-1)Class 3R
Output3.6 mW
Guide light sourceTypeRed semiconductor laser
Wavelength660 nm
Laser class (IEC60825-1)Class 1
Output0.15 mW
Sampling frequencyInternal Trigger133 ms (High Speed Mode), 266 ms (Standard Mode)
External Trigger266 ms max. (High Speed Mode), 532 ms max. (Standard Mode)*6
Environmental resistanceAmbient lightIncandescent lamp/fluorescent lamp: 5,000 lux max.
Ambient temperature0 to +35 °C 32 to 95 °F
Relative humidity20 to 85 % RH (No condensation)
WeightApprox. 3,000 g
*1 The laser classification for FDA(CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No. 50.The resolution of the height (distance from head reference plane to measurement workpiece) is 1 µm(*2)._x000D_ _x000D_ *2 This is ±3 σ value (Auto Maintenance Mode is OFF) when the average height of a single rectangular area(*3) has been measured for 30 seconds using a KEYENCE standard target._x000D_ _x000D_ *3 The rectangular size is WI-001 : 0.3 mm × 0.9 mm 0.01" × 0.04", WI-004 : 1.1 mm × 3.7 mm 0.04" × 0.15", WI-010 : 3 mm × 9 mm 0.12" × 0.35"._x000D_ _x000D_ *4 This is σ value (Auto Maintenance Mode is OFF, Capture Timing is “Prioritize Accuracy”) when the average height difference of two rectangular areas(*3) has been measured for 30 seconds using a KEYENCE standard target._x000D_ _x000D_ *5 This is the value (Auto Maintenance Mode is OFF, Capture Timing is “Prioritize Accuracy”) when the average height difference of two rectangular areas(*3) has been measured using a KEYENCE standard target._x000D_ _x000D_ *6 The workpiece stopping time at capturing is 120 ms (High Speed Mode) or 240 ms (Standard Mode).

 

По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:

  

8 (029) 555-8-000

  

8 (044) 555-8-000

 

8 (017) 255-8-000

Или отправьте нам запрос на e-mail:  zapros@filfar.by

 

Информация для заказа
  • Цена: Цену уточняйте
Контакты
  • Телефон:
    +375(44)765-55-50
    +375(29)690-11-55
  • Контактное лицо:
    Сергей, Владимир
  • Адрес:
    ул. Западная, д.13, каб.519, Минск, Беларусь
  • Email:
    zapros@filfar.by
Карта